HPLC Waste Collection Kit for 51mm Carboys, includes 10-port Cap, Carbon Filter, Adapters

HPLC Waste Collection Kit for 51mm Carboys, includes 10-port Cap, Carbon Filter, Adapters - Choose Basic or Plus Model

The 51mm thread is commonly found on jerricans and tighthead blow-molded containers in North America, including UN-rated and DOT-rated storage and transportation carboys.

Although practically all the port caps we offer could be used for either solvent extraction or waste collection, the difference in function is related to the material of the wetted components and in how ventilation is handled. During solvent collection, vapors must exit the container as it fills —a problem resolved through the use of a chemical exhaust filter. With solvent waste, impurities are a low concern and economical solutions are preferable, so waste collection manifolds are made from polypropylene instead of PTFE (although they can be custom-ordered in PTFE if your process requires higher chemical compatibility than polypropylene can provide.)

CP Lab Safety's HPLC waste kits include a 10-port kit that fits a specific waste container, an exhaust filter with adapters, and a variety of plugs and adapters to fit common laboratory tubing sizes. With our kits, you'll have everything you need to set up your waste collection system.

Waste Collection Manifolds include (6) Type A port and (4) Type D ports

• Smallest hole (Type A) accepts 1/4-28 UNF tubing adapters
• Largest hole (Type D) accepts 1/4” NPT tubing adapters

Basic Kit Contents
The Basic Kit for HPLC waste collection includes a 10-port Polypropylene manifold port cap, an exhaust carbon filter, carbon filter adapters (both straight and 90 degree elbow), and a fittings kit with tubing connections for typical analytical-scale HPLC instruments, plugs.

Plus Kit Contents
The Plus Kit includes the Basic Kit plus the addition of a color changing indicator for real-time 'end of service life' detection for organic solvents, and PTFE tubing for detector outlets or for short effluent tubes.

Components:

• Port Cap:
  • 10-port Polypropylene manifold
• Exhaust Filter:
  • Standard carbon filter + 2 adapters (straight and 90 degree elbow)
• Fittings:
  • (6) PTFE Type A port plugs
  • (3) PP Type D port plugs
  • (1) Barbed 1/4" Y-connector
  • (1) 3/8" ID barbed adapter
  • (3) 1/4" ID barbed adapters
  • (1) 3/16" ID barbed adapter
  • (1) 1/8" ID barbed adapter
  • (2) 1/16" OD tube fittings
  • (2) 2.2mm OD tube fittings
  • (1) 2.5mm OD tube fitting
  • (3) 1/8" OD tube fittings

Additional components (Plus Kit only)

• PTFE tubing (1.5 meters / 5 feet)
• color-changing indicator for carbon filter - provides a visual reminder when the cartridge is nearing end-of-life